XARAM XE 17-33 + STAINLESS FLUE KIT DUAL FUEL WASTE OIL HEATER

xaro 16

New product

XARAM XE-17-33 with power adjustment in the range of 17-33 kW. The flagship composed of high quality components and safety. The advanced microprocessor controller, LEDs work or failure of the furnace, simple and fail-safe controller, the combustion chamber made of special heat-resistant sheet. 

£ 1,350.00

Customer ratings and reviews

Nobody has posted a review yet
in this language
Rate / write a comment

 STANDARD STAINLESS FLUE KIT - VERY HIGH QUALITY - 5M X 150MM PIPES -PEAK - 2X ADJUSTABLE 90-45 DEGREES ELBOW-DRAFT BOX

XARAM XE-17-33 with power adjustment in the range of 17-33 kW. The flagship composed of high quality components and safety. The advanced microprocessor controller, LEDs work or failure of the furnace, simple and fail-safe controller, the combustion chamber made of special heat-resistant sheet. Heater ENERGY XARAM 17-33 XE is designed for heating industrial premises not covered by the central heating system (workshops, automotive, industrial buildings, warehouses, inventory buildings, basements, garages, etc.). The stove can run on most oils of mineral and vegetable example, .: Used motor oils, gear, drive HBO I, II, III with a viscosity of not more than SAE80 oils of gastronomy, oil plants (biofuels).

- stepless power adjustment in the range of 17kW-33kWA
- LEDs work or possible malfunction of the respective actuators furnace
- protection against overheating of oil in the furnace
- combustion chamber made of steel with high temperature resistance (stainless steel)
- built-in thermostat control (fan switches off when the temperature drops below 40 ° C)
- Thermostatic supervision of the pump
- protection against oil overflow in the furnace
- thermal radiation in all directions
- an outlet panel on the front wall of the hot air blower
-manual ignition
- Durable powder-coated

 

Technical parameters

 

Name:

XE 17-33

Minimum power:

17 kW

Max power:

33 kW

oil consumption min:

1.7 (l / h)

oil consumption max:

3.3 (l / h)

Fuel tank capacity:

50l

power consumption:

100W

Ignition:

manual

height:

1370 mm

width:

600 mm

length:

850 mm

weight:

86kg

Warranty:

24 months *

  * Warranty Card components are covered by the unit within 12 months of purchase, the combustion chamber within 36 months, and automatic control (thermostat) for 3 months

Related Products

waste oil heater Xaram XE-17-33 with power adjustment in the range of 17-33 kW. The flagship composed of high quality components and safety. The advanced microprocessor controller, LEDs work or failure of the furnace, simple and fail-safe controller.

£ 1,060.00

The XARAM XE 30-52kW , delivers up to 52 kW / 170,000 Btu of heat with fully variable heat output. The heater combines a high capacity 5,500m3 per hour blower fan and built-in heat-exchanger to deliver exceptional heat output into your workshop.

£ 1,680.00

XARAM XE 8-30 3 power stages - 8/19/30 kW. The special design of the furnace and the fan mounting offer unparalleled high heat furnaces other structures. A simple and trouble-free driver. Heater XARAM ENERGY 8-30 XE is designed for heating industrial premises not covered by the central heating system

£ 935.00

XARAM XE 8-30 3 power stages - 8/19/30 kW. The special design of the furnace and the fan mounting offer unparalleled high heat furnaces other structures. A simple and trouble-free driver. Heater XARAM ENERGY 8-30 XE is designed for heating industrial premises not covered by the central heating system

£ 1,199.00

waste oil heater XARAM XE 30-52kW , delivers up to 52 kW / 170,000 Btu of heat with fully variable heat output. The heater combines a high capacity 5,500m3 per hour blower fan and built-in heat-exchanger to deliver exceptional heat output into your workshop.

£ 1,950.00

WASTE OIL DUAL FUEL HEATER BURNER XARAM XE ENERGY 52R

£ 2,360.00
Positive SSL